MHI Carbon Capture Hits 90% Rate Over 4,500 Hours at ArcelorMittal Gent

electrofuel.ai

MHI Carbon Capture Hits 90% Rate Over 4,500 Hours at ArcelorMittal Gent

carbon capturePower-to-LiquidFischer-TropschCO2 utilisationsteel decarbonisation
November 11, 2026  •  3 min read
A carbon capture trial at one of Europe’s largest integrated steel plants has cleared a critical engineering threshold: Mitsubishi Heavy Industries’ Advanced KM CDR Process held more than 90% CO₂ capture efficiency for over 4,500 continuous operating hours at ArcelorMittal’s Gent steelworks — the kind of industrial-scale endurance record that transforms point-source CO₂ from a liability into a bankable PtL feedstock.
>90%
CO₂ capture rate achieved
4,500+
Continuous operating hours logged
28 Oct 2026
Trial results published
1
Integrated steelworks site (ArcelorMittal Gent)

Process Engineering: What the KM CDR Result Means

The Advanced KM CDR Process is an amine-based post-combustion capture system. Sustaining >90% capture across 4,500+ hours under the variable flue-gas conditions of a blast-furnace and basic-oxygen-steelmaking environment is materially harder than achieving the same figure on a steady-state gas-fired plant. Steel off-gases contain CO, H₂, N₂ and varying CO₂ partial pressures — conditions that stress solvent degradation rates and heat-exchanger performance simultaneously. That the trial held its headline figure throughout is the result most relevant to downstream Fischer-Tropsch project developers: it confirms the technology can deliver a continuous, predictable CO₂ stream, which is the first requirement for a collocated PtL plant sizing its synthesis-gas feed.

For Power-to-Liquid process engineers, the colocation logic is straightforward. A Fischer-Tropsch loop — whether INERATEC’s compact modular reactor or a Sunfire co-electrolysis configuration producing syngas directly — needs CO₂ at consistent pressure, purity and flow rate. Intermittent or degraded supply forces either costly buffer storage or partial-load operation of the RWGS or co-electrolysis unit, both of which cut catalyst utilisation and raise levelised fuel cost. A capture system validated for 4,500+ hours of stable output at >90% rate removes the dominant supply-side uncertainty from the project-finance model.

CO₂ Utilisation as a PtL Value Chain Anchor

Hard-to-abate industrial emitters such as integrated steel plants are increasingly attractive anchor points for PtL clusters precisely because they cannot be electrified on the timescales demanded by RED III and ReFuelEU. ArcelorMittal Gent produces millions of tonnes of CO₂ annually; even capturing a fraction of that output at the demonstrated >90% rate would supply sufficient feedstock for a multi-hundred-MW Fischer-Tropsch facility producing RFNBO-compliant synthetic kerosene or e-methanol. The AI-enabled digital-twin and process-optimisation tools that are now standard in electrolyser management — real-time impedance spectroscopy, degradation forecasting, dynamic load-following — are equally applicable to solvent regeneration scheduling in amine-capture columns, reducing reboiler energy consumption and extending solvent lifetime, two of the dominant operating-cost drivers in KM CDR-class systems.

One honest caveat deserves stating: captured CO₂ is only as ‘green’ as the hydrogen used to hydrogenate it. If the H₂ arrives from grid-average electrolysis rather than dedicated renewable capacity, the resulting e-fuel fails the RFNBO additionality test under RED III. The MHI trial demonstrates supply-side readiness; it does not resolve the renewable-electricity question. That said, the efficiency objection to e-fuels — ICCT data puts the well-to-wheel efficiency of the e-fuel pathway at around 16%, versus approximately 72% for a battery-electric vehicle — is primarily an argument about the cost and origin of input electricity. It carries far less weight when the hydrogen feedstock is geological rather than electrolytic, and it is structurally irrelevant for long-haul aviation and deep-sea shipping, where battery-electric substitution remains technically infeasible at scale.

Data Continuity: Why 4,500 Hours Is the Key Metric

Project lenders and offtake counterparties in PtL do not price on peak performance; they price on P90 availability. A capture system that achieves 95% on day one but drifts to 70% by month six is unbankable as a PtL CO₂ source. The 4,500-hour duration at ArcelorMittal Gent — equivalent to roughly six months of continuous operation — begins to constitute the statistical base that project-finance due diligence requires. The next benchmark the industry will watch for is a full 8,760-hour (one-year) dataset, ideally with solvent consumption and heat-integration efficiency figures broken out, to allow CAPEX/OPEX modelling of commercial-scale carbon-capture-to-Fischer-Tropsch configurations.

Bottom Line
MHI’s >90% CO₂ capture rate held over 4,500+ hours at ArcelorMittal Gent is not merely a steelmaking decarbonisation milestone — it is a process-engineering proof point for the PtL supply chain. By demonstrating continuous, high-purity CO₂ delivery under demanding industrial conditions, the trial materially de-risks the feedstock leg of collocated Fischer-Tropsch or co-electrolysis projects, and gives project financiers the operational continuity data they need to underwrite long-term CO₂ supply agreements.

Sources

  1. Horse Powertrain: Methanol-Range-Extender
  2. Green Hydrogen Market (2035): Renewable Energy Integration, Electrolyzer Technologies, Industrial Decarbonization and Cl

Featured image via Unsplash.

⚖ Independent site — documentary information only

This is not an official site. It is published by a private company and does not emanate from any public authority, institutional programme, government department or research organisation. It represents none of them and speaks for none of them in any capacity.

Nature of the content. Articles are documentary summaries drawn from cited public sources. They may contain inaccuracies, omissions or information that has since become outdated. No financial, technical, legal or investment advice is provided.

Always verify against primary sources. For any information concerning a public programme, a regulation or an institutional project, only the publications of the competent authority are authoritative.

© 2026 BESS Energie SRL · BCE 0698.949.732 · info@bess.be

⚙️ AI Transparency · EU Regulation 2024/1689 (AI Act) · art. 50
This article was produced with the assistance of an artificial intelligence system (Claude, Anthropic). This notice applies to all editorial content on this site, including automatically published content. Informational only — verify official sources before any decision.

Related Posts

INNOZHERO Reaches FID: CCS Meets CO₂-to-Fuels at Scale

The EU’s first large-scale CCS project at a waste-to-energy plant has reached Final Investment Decision in Helsingborg, opening a replicable CO₂ capture pathway for Power-to-Liquid feedstock supply.

UK Net-Zero Roadmap: SAF to Cover 65% of Aviation Fuel by 2050

Sustainable Aviation’s updated 2050 roadmap assigns SAF a 65% share of jet fuel demand, placing Power-to-Liquid Fischer-Tropsch routes at the centre of the decarbonisation calculus.

Leave a Reply

Your email address will not be published. Required fields are marked *

You Missed

Washington SAF Tax Credit and ReFuelEU: Compliance Pressure Mounts for PtL Producers

  • By Sequaris
  • November 16, 2026
  • 65 views
Washington SAF Tax Credit and ReFuelEU: Compliance Pressure Mounts for PtL Producers

INNOZHERO Reaches FID: CCS Meets CO₂-to-Fuels at Scale

  • By Sequaris
  • November 13, 2026
  • 76 views
INNOZHERO Reaches FID: CCS Meets CO₂-to-Fuels at Scale

MHI Carbon Capture Hits 90% Rate Over 4,500 Hours at ArcelorMittal Gent

  • By Sequaris
  • November 11, 2026
  • 105 views
MHI Carbon Capture Hits 90% Rate Over 4,500 Hours at ArcelorMittal Gent

Horse Powertrain D20 Methanol REEV: Process Engineering Meets Road Transport

  • By Sequaris
  • November 2, 2026
  • 172 views
Horse Powertrain D20 Methanol REEV: Process Engineering Meets Road Transport

Methanol Fleet Orders Outpace Fuel Supply: 2035 Slippage Risk

  • By Sequaris
  • November 1, 2026
  • 242 views
Methanol Fleet Orders Outpace Fuel Supply: 2035 Slippage Risk

Ethanol as Drop-In for Methanol Ships: Compliance Implications

  • By Sequaris
  • October 27, 2026
  • 216 views
Ethanol as Drop-In for Methanol Ships: Compliance Implications